How to install the inlet - outlet fittings kit on the DualQuickfit hydraulic links?
1. Pressurized system
A kit of brass inlet / outlet fittings is used to connect the inter-panel links to the transfer circuit.
M3/4’’ for DN15 inter-panel links
M1’’ for DN26 inter-panel links
This kit includes, for a line of panels:
|
|
These fittings are installed at the inlet and outlet of each line of sensors.
Assembly of the clamp:
Place the clamp on the hose
Insert the barbed fitting into the hose (1 & 3)
Tighten up to the stop (2 & 4)
<!> Do not squeeze any tighter
The inlet / outlet fitting kit is to be installed as specified below:
Simplified diagram installation of a hydraulic line with 4 panels in portrait
Simplified diagram installation of a hydraulic line of 2 panels in landscape
1. Hydraulic inlet | 2. Hydraulic outlet | 3. DualQuickfit / Transfer circuit connection | 4. DualQuickfit link plug |
The fluid must flow from bottom to top in the panels.
Respect the hydraulic connection direction (3) at the inlet (1) and at the outlet (2), as shown in the diagrams above and in the table below.
| Hydraulic inlet (1) | Hydraulic outlet (2) |
Portrait | Bottom left | Top right |
Landscape | Bottom right | Top left |
2. Pool system
A kit of compression inlet / outlet fittings for the DN26 inter-panel links allows the inter-panel links to be connected to the transfer circuit.
This kit includes, for a line of panels:
|
|
These fittings are installed at the inlet and outlet of each line of panels.
The inlet / outlet fitting kit is to be installed as specified below:
Simplified diagram installation of a hydraulic line with 4 panels in portrait
1. Hydraulic inlet | 2. Hydraulic outlet | 3. DualQuickfit / Transfer circuit connection | 4. DualQuickfit link plug |
To authorize the winter draining of the direct pool heating system, the DualSun SPRING panels must imperatively be installed in portrait. The fluid must flow from bottom to top in the panels.
Respect the hydraulic connection direction (3) at the inlet (1) and at the outlet (2), as shown in the diagrams above and in the table below.
| Hydraulic inlet (1) | Hydraulic outlet (2) |
Portrait | Bottom left | Top right |
For more information, click here : How do DualQuickFit interpanel connectors work?
